Electrical Circuits-1 Syllabus Diploma in Electrical Engineering, Regulation 2010, Short Suggestion, Exam Dates, Exam Routine, Question Out, Book list with code

  • To understand the concept of network theorems.
  • To develop understanding of AC fundamentals.
  • To understand the fundamental principles of single phase AC circuit in solving the different circuit problems.
  • To develop skill in measuring current, voltage and power in RL, RC and RLC circuits.

 

SHORT DESCRIPTION

Network theorem-circuit parameters; Electrical network; Kirchhoff’s Law; Thevenin’s theorem; Norton’s theorem; Super position theorem; Recipricity theorem; Maxwell’s theorem; Maximum power transfer theorem; Single phase AC circuits; Principles of basic circuits; Vectors; Impedance triangle; Power and power factor.

DETAIL DESCRIPTION

 

THEORY

NETWORK THOREM(DC Only)

  1. Understand circuit parameters

1.1       Define circuit parameters.

1.2       List the circuit parameters.

1.3       State the different circuit parameters.

1.4       Name the unit of circuit parameters.

  1. Interpret Electric Network

2.1       Explain different types of electric networks.

2.2       List the different types of electric networks.

2.3       Compare the active and passive network.

2.4       Explain the current and voltage source in electric network.

2.5       Give example of current source & voltage source.

  1. Apply the principle circuit theorems

3.1       Explain Kirchhoff’s current and voltage Law.

3.2       Solve problems with KCL & KVL.

3.3       Explain Thevenin’s theorem.

3.4       Solve problems related to Thevenin’s theorem.

3.5       Explain Super position theorem.

3.6       Solve problems related to Super position theorem.

3.7       Explain Norton’s theorem.

3.8       Solve problems related to Norton’s theorem.

3.9       Explain Maxwell’s theorem.

3.10     Solve problems related Maxwell’s theorem.

3.11     Explain Recipricity theorem.

3.12     Solve problems related to Recipricity theorem.

3.13     Explain Maximum power transfer theorem .

3.14     Solve problems related Maximum power transfer theorem.

  1. Apply the principle of Star/Delta convertion

4.1       Explain Star/Delta convertion.

4.2       Convert star connected resistors to delta connection and delta connected resistors to star connection.

4.3.      Solve problems related to Star/Delta convertion.

 

SINGLE PHASE AC CIRCUIT

  1. Understand the concepts of AC circuit.

5.1       Explain AC circuit.

5.2       State the importance of AC circuit in the field of electricity.

5.3       List the advantages and disadvantages of AC circuit.

  1. Apply the concept of AC fundamentals

6.1       Explain the generation of AC voltage.

6.2       Derive the equation: e = EmaxSinωt

6.3       Construct a Sine wave in relation to emf generation.

6.4       Define cycle, frequency & time period.

6.5       Show the relation : f =

6.6       List the commercial frequency of different countries.

6.7       Explain phase & phase difference with diagram.

6.8       Related solve problems.

  1. Apply the concept of alternating quantities and rms values.

7.1       Define instantaneous values, average and maximum values of alternating quantities.

7.2       Generalize the rms values.

7.3       Define form factor and peak factor.

7.4       Solve problems on instantaneous, average and rms values.

7.5       Define ohmic resistance, effective resistance and skin effect.

7.6       Compare ohmic & effective resistance.

 

VECTORS AND COMPLEX QUANTITIES.

  1. Apply the principles of vectors and vector quantities.

8.1       Define vector quantities.

8.2       EXplain vector representation of alternating voltage and current.

8.3       Explain vector in Polar form.

8.4       Explain vector in Rectangular form.

8.5       Formulate the relation between vectors expressed rectangular and polar co-ordinate.

8.6       Solve problems relating to vector sum & difference, multiplicayion and division.


SINGLE PHASE CIRCUIT

  1. Apply the concept of AC circuiit consist of pure resistance, pure inductance and pure capacitances.

9.1       Sketch a circuit containing pure Resistance.

9.2       Explain the vector & phasor diagram of a pure resistive circuit.

9.3       Equate the current and voltage relation in pure resistive circuit.

9.4       Sketch a circuit containing pure Inductance.

9.5       Explain the vector & phasor diagram of pure Inductive circuit.

9.6       Evaluate inductive reactance, current and voltage relation in pure Inductive circuit.

9.7       Sketch a circuit containing pure Capacitance.

9.8       Explain the vector & phasor diagram of pure Capacitive circuit.

9.9       Formulate the capacitive reactance.

9.10     Simplify the current and voltage relation in pure Capacitive circuit.

  1. Apply the concept of AC series circuittontaining resistance, inductance and capacitance.

10.1     Draw the circuit containing resistance and inductance in series.

10.2     Explain the vector & phasor diagram in RL series circuit.

10.3     Formulate the impedance, current and voltage drop in RL series circuit.

10.4     Draw the impedance triangle in RL series circuit.

10.5     Draw the RC series circuit.

10.6     Explain the vector & phasor diagram in RC series circuit.

10.7     Formulate the impedance, current and voltage drop in RC series circuit.

10.8     Draw the impedance triangle of RC series circuit.

10.9     Solve problems on RL & RC series circuits.

10.10   Sketch a circuit containing resistance, inductance and capacitance in series.

10.11   Explain the vector & phasor diagram of RLC series circuit.

10.12   Draw the impedance triangle of RLC series circuit.

10.13   Calculate the inductive reactance, capacitive reactance, total impedance, current &voltage drops in RLC series circuit.

10.14   Solve problems on RLC series circuit.

  1. Apply the concept of power &power in AC circuit.

11.1     Define power, power factor, active & reactive power.

11.2     Calculate power and power factor of pure Resistive circuit.

11.3     Calculate power and power factor of pure Inductive circuit.

11.4     Calculate power and power factor of pure Capacitive circuit.

11.5     Calculate power, power factor, active & reactive power of RL, RC & RLC series circuit.

11.6    Explain the power diagram of R, L, C, RL, RC & RLC series circuit.

11.7     Solve problems on power & power factor of different series circuit.

 


practical;

1          Show skill in using oscilloscope in measuring AC voltage & frequency.

1.1       Select the oscilloscope.

1.2       Select required tools and equipment.

1.3       Identify the control & function knobs of oscilloscope

1.4       Set the function knobs of oscilloscope as instructed.

1.5       Identify the control & function knobs of a signal generator.

1.6       Set the function knobs as instructed

1.7       Check all connections.

2          Show skill in verifying kerchief’s laws.

2.1       Select experiment circuit, components, meters and necessary materials.

2.2       Construct a series-parallel circuit.

2.3       Select the series section of the circuit.

2.4       Verify Kirchhoff’s voltage law.

2.5       Select the parallel section of the circuit.

2.6       Verify Kirchhoff’s current law.

3          Show skill in verifying Thevenin’s theorem.

3.1       Select an experiment circuit.

3.2       Select tools, equipment and circuit.

3.3       Construct the circuit as per diagram.

3.4       Mark the circuit as per diagram.

3.5       Measure open circuit voltage across the points.

3.6       Measure the equivalent resistance from the two points with appropriate condition.

3.7       Record Thevenin voltage and resistance.

3.8       Verify the data with the theoretical calculation.

4          Show skill in verifying Norton’s theorem.

4.1       Select an experiment circuit.

4.2       Select tools, equipment and circuit.

4.3       Construct the circuit as per diagram.

4.4       Mark the points for Norton’s equivalence.

4.5       Measure short circuit current at the points.

4.6       Measure the equivalent resistanc/conductance at the points with appropriate condition.

5          Show skill in verifying Superpostion theorem.

5.1       Select an experiment-circuit.

5.2       Select tools, equipment and materials.

5.3       Construct the circuit with at least two sources of power supply.

5.4       Select a branch for superposition.

5.5       Activate one source at a time making other sources short circuited.

5.6       Measure the current though the selected branch.

5.7       Repeat the steps with all the .sources.

5.8       Add all the measured current algebraically for the selected branch.

5.9       Measure the current though the branch activating all the sources.

5.10     Compare the measured value with that of calculated value.

6          Show skill in verifying Reciprocity theorem.

6.1       Select an experiment-circuit.

6.2       Select tools, equipment and materials.

6.3       Connect the source.

6.4       Interchange the Source and Ammeter.

6.5       Repeat the process for another point.

7          Show skill in maximam power transfer theorem.

7.1       Select an experiment-circuit.

7.2       Select tools, equipment and materials.

7.3       Connect the source according to circuit dirgum.

7.4       Record and Completing data.

7.5       calculate the PL(Lood power) using PL=lL2 RL eqution.

7.6       verify maximum power transfer theorem.

8          Show skill in measuring effective resistance of a coll.

8.1       Draw the circuit diagram for determining the effective resistance.

8.2       Collect tools & equipment.

8.3       Correct the circuit according to the circuit diagram using proper equipment.

8.4       Check all connection points before actual operation.

8.5       Connect DC supply and record readings.

8.6       Calculate Ohmic resistance from the formula by recording relevant data:Rdc=Pdc/l2dc

8.8       Determine effective resistance from the formula Rac=Pac/l2ac

8.9       Compere the Ohmic resistance and effective resistance and find the raatio.

9          Show skill in determining the values of resistance & inductance and drow the vector diagram of RL series circuit.

9.1       Sketch the circuit diagram for determining resistance and inductance of a RL series circuit.

9.2       Collect tools, equipment and materials for the experiment.

9.3       Connect the circuit according to the circuit diagram using proper .

9.4       Check all connection points before actual operation.

9.5       Apply proper voltage & record readings from the meter.

9.6       Find the value of resistance & phase angle from relevant data.

9.7       Sketch the vector diagram with the relevant data as obtains.

10        Show skill in determining the values of resistance & capacitance and drawing vector diagram of RC series circuit .

10.1     Sketch the circuit diagram for RC series circuit.

10.2     Collect tools, equipment and materials for the experiment.

10.3     Connect the circuit according to the circuit diagram using proper equipment.

10.4     Check all connection points before actual operation & apply the voltage and record the relevant readings.

10.5     Determine the value if resistance, capacitance & phase angle from the data .

10.6     Sketch the vector diagram with the help of relevant data as obtained.

  1. Show skill in determining the values of resistance & inductance, capacitance and drow the vector diagram from of RLC series circuit..

11.1     Sketch the circuit diagram for RLC series circuit

11.2     List tools, equipment and materials and for the experiment.

11.3     Connect the circuit according to the circuit diagram using proper Equipment.

11.4     Check all Connection points before actual operation.

11.5     Apply proper power supply to the circuit and record the readings from the meter.

11.6     Determine the values of resistance, inductance, capacitance and phase angle from the relevant data.

11.7     Verify the supply voltage is equal to the vector sum of voltage drop in each parameters.

11.8     Sketch the vector diagram with the help of relevant data as obtained.

12        Show skills in determining power factor of a RLC series circuit and drawing vector diagram.

12.1     Sketch the circuit diagram for RlC series circuit.

12.2     Collect tools, equipment and materials for the experiment

12.3     Connect the circuit according to the circuit diagram using proper equipment.

12..4    Check all connection point before actual operation.

12.5     Apply proper power supply to the circuit and record the readings from the meter .

12.6     Determine the value of phase angle and power factor from the relevant data .

12.7     Sketch the vector diagram with the relevant data.

 

REFERENCE BOOKS.

A text book of Electrical Technology—- B.L The raja

Introduction to electrical Engineering —- V.K Mehta.

A.C Circuit— Corcoran